Commercial Electric CER5741WH Manuale delle Istruzioni Scaricare il pdf

GENERAL: All electrical connections must be in accordance with local

and National Electrical Code (N.E.C.) standards. If you are unfamiliar with

proper electrical wiring connections obtain the services of a qualified

electrician.

Remove the trim from the box and make sure that no parts are missing by

referencing the PARTS illustrations.

THIS RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF A

LED LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION

SHALL BE DETERMINED BY CSA OR CANADIAN AUTHORITIES

HAVING JURISDICTION.

WARNING – RISK OF ELECTRIC SHOCK. INSTALL THIS TRIM IN

RECESSED HOUSINGS THAT HAVE DIMENSIONS SHOWN IN FIG. 1,

WHICH INCLUDE THE FOLLOWING LUMINAIRES: INCANDESCENT

HOUSINGS – COMMERCIAL ELECTRIC HBR5ICAT, HBR5ICRAT,

HBR5, HBR5R; HALO H5T, H5RT, H5ICT, H5RICAT, H5RICAT;

CORDELIA MODELS X5LICAT, X5LICRAT; ELCO MODELS EL5ICA,

EL5RICA; LITHONIA MODELS L5, L5R; ELITE MODELS B5, B5R,

B5IC, B5RIC.

___________________________

ASSEMBLY AND INSTALLATION

INCANDESCENT HOUSINGS

1.Unscrew the WING NUT inside the CAN to detach the SOCKET

BRACKET from the CAN. Disengage the SOCKET from the SOCKET

BRACKET. (FIG. 2)

2.Thread the SOCKET ADAPTER into the SOCKET. (FIG. 3)

3.Plug the FEMALE CONNECTOR of the RETROFIT TRIM onto the

MALE CONNECTOR of the SOCKET ADAPTER ASSEMBLY. (FIG. 4)

4.Squeeze both TORSION SPRING arms together and insert into the

TORSION SPRING SLOTS (or RECEIVER BRACKETS) of the CAN.

Tuck all wires into the CAN and carefully push the RETROFIT TRIM into

CAN. (NOTE: To provide enough room in shallow cans, carefully position

SOCKET ADAPTER and SOCKET adjacent to the long side of the LED

DRIVER prior to inserting the RETROFIT TRIM into the CAN.) (FIG. 5)

LED HOUSINGS

1.Plug the FEMALE CONNECTOR of the RETROFIT TRIM onto the

MALE CONNECTOR of the HALO HOUSING. (FIG. 4)

2.Squeeze both TORSION SPRING arms together and insert into the

TORSION SPRING SLOTS (or RECEIVER BRACKETS) of the CAN.

Tuck all wires into the CAN and carefully push the RETROFIT TRIM into

CAN. (FIG. 5)

FACEPLATE REPLACEMENT (OPTIONAL)

This product is designed to allow the user to easily replace the

magnetically

attached DECORATIVE FACEPLATE of the RETROFIT TRIM.

1.Pull off the FACEPLATE from the RETROFIT TRIM. (FIG. 6)

2.Attach the replacement FACEPLATE onto the RETROFIT TRIM.

(FIG. 6)

WARNING - RISK OF ELECTRIC SHOCK. DISCONNECT MAIN

POWER AT FUSE OR CIRCUIT BREAKER BEFORE INSTALLING

OR SERVICING THE FIXTURE.

LED 5” RETROFIT TRIM INSTALLATION

INSTRUCTIONS - MODEL CER5741

Please read carefully and save these instructions, as you

may need them at a later date.

QUESTIONS? CALL TOLL

FREE 1-800-345-0542

5 in. – 7 in.

FIG. 1

FIG. 2

FIG. 3

PARTS

SOCKET ADAPTER

ASSEMBLY

RETROFIT TRIM

HOUSING DIMENSIONS

FIG. 4

FIG. 5

5 in.

FIG. 6

1 2 3 4 5 6

Sommario

Pagina 1 - INSTRUCTIONS - MODEL CER5741

GENERAL: All electrical connections must be in accordance with localand National Electrical Code (N.E.C.) standards. If you are unfamiliar withproper

Pagina 2 - Risk of Electric Shock

Pagina 3 - 1-800-345-0542

GENERAL: Todas las conexiones eléctricas deben realizarse conforme a lasnormas locales y al Código Eléctrico Nacional (N.E.C. por sus siglas eninglés)

Pagina 4 - COMPONENTE

Pagina 5 - MODÈLES CER5741

AVERTISSEMENT – RISQUE DE DÉCHARGE ÉLECTRIQUE. COUPEZ LE COURANT AU NIVEAU DU DISJONCTEUR OU DE LA BOÎTE DE FUSIBLES AVANT D’INSTALLER OU D’EFFECTUE

Pagina 6 - CERTIFIÉ SELON LA NORME

Commenti su questo manuale

Nessun commento

Commercial Electric CER5741WH Manuale delle Istruzioni

Navigare online o scaricare Manuale delle Istruzioni per no Commercial Electric CER5741WH. Commercial Electric CER5741WH Instructions / Assembly Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi no Commercial Electric CER5741WH